How our Do-It-Yourself kits work

In a nutshell, this is how our kit building process works: We supply the ready to assemble parts with detailed step-by-step instructions, and you supply a few common tools and some perseverance to complete the final assembly. With the tools handy the entire assembly should take between 1-2 hours. We also offer a Build Service>>

Using the IKEA concept that makes good stuff affordable to all, our kits contain a handful of parts that require minor sanding, screwing together, and cutting and soldering of electrical wires. Below is a sample of the typical parts, as well as a sample page from our assembly guide.

Our fully illustrated and comprehensive step-by-step build guide features clear and detailed instruction along with assembly tips and tricks. Even if you have no experience with high tech electronics, with our guide and some determination you can make your very own light come to life.

To assemble our kit you will typically need the following tools

Soldering Iron Example: $7.99 Radio Shack 5 Piece Set >> Solder Fine Size, Flux Cored Flux (recommended) Example: Radio Shack Flux Paste >> Wire Stripper & Cutter Example: Radio Shack Combo >> Phillips Screwdriver (Star) Small & Medium sized tips Allen wrench 3/32" sized (All tools are detailed further in our build guide) More about soldering >>

Questions or concerns? Please visit our FAQ section >>

The high-powered affordable kits we offer Light Kits & Parts>>